1. It lights when turning on the front fog light.

A. Right

B. Wrong

Answer：B

2. Whats the meaning of the double white solid lines in far front of the intersection?

A. stopping and yield line

B. slowdown and yield line

C. left-turn waiting line

D. waiting to run line

Answer：A

3. How long is the period of probation of a motor vehicle driver who has applied for a driver license for the first time?

A. 18 months

B. 16 months

C. 12 months

D. 6 months

Answer：C

4. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer：C

5. How to drive in sand, hail, rain, fog, ice and other weather conditions?

A. run as normal

B. maintain the speed

C. speed up properly

D. reduce the speed

Answer：D

6. What kind of behavior of this driver violates the law?

A. not hold the steering wheel according to regulation

B. angle of the seat is not correct

C. not buckled up

D. the driving posture is incorrect

Answer：C

7. May watch car video in good road conditions.

A. Right

B. Wrong

Answer：B

8. What marking are the white broken lines in the circles?

A. small vehicles turning lines

B. lane connection lines

C. non-motorized vehicles guide lines

D. intersection guide line

Answer：D

9. The yellow lane-dividing line on the road is used to _____

A. allow to drive in left lane

B. separate the traffic flow in opposite directions

C. separate the traffic flow in the same direction

D. prohibit to cross the opposite lane

Answer：B

10. Stopping temporarily on the road should not obstruct the passing of other vehicles and pedestrians.

A. Right

B. Wrong

Answer：A

11. It is a bad habit for a driver to put his left arm on the window of the vehicle or hold the gear lever in his right hand for a long time.

A. Right

B. Wrong

Answer：A

12. How to drive through the intersection without traffic lights?

A. reduce speed and go slowly

B. speed up and pass

C. let large vehicle go first

D. let the left vehicle go first

Answer：A

13. When a vehicle changes lane, the driver only needs to turn on the turn signal before rapidly entering the new lane.

A. Right

B. Wrong

Answer：B

14. The continuously flashing yellow light is to warn that the driver should look and make sure it is safe to pass.

A. Right

B. Wrong

Answer：A

15. In the course of reversing, the driver should move slowly, observe the conditions on both sides and in the rear and be ready to stop anytime.

A. Right

B. Wrong

Answer：A

16. Whats the meaning of this sign?

A. bump road

B. low-lying road

C. high outburst road

D. hump bridge

Answer：B

17. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer：B

18. When a motorized vehicle breaks down on the road and is difficult to move, the driver should place a warning sign within 50 meters behind the vehicle.

A. Right

B. Wrong

Answer：B

19. How to run when encountering this situation at the intersection?

A. stop and wait

B. obey the traffic lights

C. run straight on the right side

D. may turn right

Answer：A

20. If the license plate of a motorized vehicle has been destroyed, the owner of the vehicle should apply for reissuing or changing to the vehicle management station at the registration place.

A. Right

B. Wrong

Answer：A

21. Whats the meaning of this figure mark on the road?

A. a mark of keeping distance

B. a mark of minimum distance

C. a mark of speed limit

D. a mark of road number

Answer：C

22. Whats the meaning of this sign?

A. 3.5m width limit

B. 3.5m width limit ban is lifted

C. 3.5m distance from vehicles limit

D. 3.5m height limit

Answer：D

23. This sign indicates running slowly or stopping to let the vehicle on main road go first.

A. Right

B. Wrong

Answer：A

24. A person who has the expired driving license can drive motorized vehicle within 1 year.

A. Right

B. Wrong

Answer：B

25. When a vehicle changes lane before an intersection, the driver should do so ______.

A. In the area marked by solid lines before the intersection

B. In the area marked by solid lines in the intersection

C. In the area marked by broken lines as indicated by the guide arrow

D. Before the stop line at the intersection

Answer：C