1. What does this symbol indicate?

A. switch of high beam lights

B. switch of the low beam lights

C. master switch of vehicle lights

D. the switch of tail fog light

Answer：C

2. When a vehicle is being overtaken by another vehicle, the driver should _____.

A. Run by the central line of the road

B. Speed up and yield

C. Continue to speed up and run

D. Reduce speed and run on the right side

Answer：D

3. Whats the meaning of this sign?

A. fewer lanes

B. merging point

C. emergency lane

D. changing to left lane

Answer：A

4. A motorized vehicle driver who drives more than 50% faster than the prescribed speed limit is subject to a 12-point penalty.

A. Right

B. Wrong

Answer：A

5. You have the priviledged passing right of way in this situation.

A. Right

B. Wrong

Answer：A

6. From which side to overtake?

A. both sides

B. right side

C. left side

D. the side with no obstacle

Answer：C

7. What kind of marking is the yellow broken line in the center of the road?

A. indicative marking

B. prohibitive marking

C. warning sign

D. auxiliary marking

Answer：A

8. In which section cannot overtake?

A. mountain road

B. urban elevated road

C. urban expressway

D. narrow bridge and curve

Answer：D

9. Whats the meaning of this sign?

A. Passing on both sides

B. Passing by the right side

C. Passing by the left side

D. Passing is prohibited

Answer：B

10. The penalty points will be _____ if violating the traffic lights.

A. 2-point penalty

B. 3-point penalty

C. 6-point penalty

D. 12-point penalty

Answer：C

11. A motorized vehicle runs on the road without a label of inspection, the traffic police can detain the vehicle.

A. Right

B. Wrong

Answer：A

12. When driving at night on a road with no or poor lighting, the driver should switch from the low beam light to the high beam light. But the vehicle following in the same direction is not allowed to use the high beam light.

A. Right

B. Wrong

Answer：A

13. When a vehicle passes a bumped road, the driver should ________.

A. Speed up and dash over under inertia

B. Change to the neutral gear and slide over

C. Maintain the original speed and pass

D. Pass slowly and steadily

Answer：D

14. What does the traffic light mean?

A. allowed to pass

B. draw attention

C. intersection warning

D. prohibited from passing

Answer：D

15. It lights to indicate that ______

A. windscreen wash lacks

B. braking oil lacks

C. cooling system malfunction

D. coolant lacks

Answer：D

16. It lights to indicate that ______

A. ABS system malfunction

B. handbrake is released

C. braking system malfunction

D. safety bags malfunction

Answer：A

17. This sign reminds there is a ferry ahead for vehicles.

A. Right

B. Wrong

Answer：A

18. When passing through an overflowing road, a high gear should be used to pass rapidly.

A. Right

B. Wrong

Answer：B

19. Whats the meaning of the white solid lines at the edge of the carriageway on both sides of the road?

A. Vehicles may cross temporarily

B. Vehicles are not allowed to cross.

C. Motorized vehicles may cross temporarily.

D. Non-motorized vehicles may cross temporarily

Answer：B

20. What is the time limit of deferred license checking due to military service, abroad and other reasons?

A. 3 years

B. 5 years

C. 1 years

D. 2 years

Answer：A

21. As thick fog reduces visibility, turning on the high beam light can increase the visibility.

A. Right

B. Wrong

Answer：B

22. The main impact of the road conditions in icy and snowy weather is ______.

A. The electric equipment can easily get wet and cause short circuit

B. The visibility is lower and the field of vision is blurred

C. The resistance to the vehicle increases

D. Poor braking performance and Side pulling

Answer：D

23. When encountering non-motorized vehicles cutting in on the road, the driver should ___.

A. Honk to warn

B. Speed up and pass

C. Reduce speed and yield

D. Suddenly speed up when approaching

Answer：C

24. Whats the meaning of this sign?

A. lane information indication

B. road branching point ahead

C. place and distance indication

D. intersection ahead

Answer：D

25. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer：C