海南2024考驾驶证英文题库

1. When encountering an overflowing bridge, the driver should look at the situation, and passes through slowly before he makes sure that it is safe to do so.

A. Right

B. Wrong

Answer:A

2. Whats the meaning of this sign?

A. slippery section

B. sharp curve

C. test driving section

D. curve section

Answer:A

3. Before a motorized vehicle overtakes, the driver should turn on the left-turn signal, use the high and low beam lights alternately or honk in advance.

A. Right

B. Wrong

Answer:A

4. This sign reminds the lane for non-motorized vehicles ahead.

A. Right

B. Wrong

Answer:B

5. This sign indicates ______

A. expressway service area ahead

B. expressway shelter ahead

C. expressway bus station ahead

D. expressway parking area ahead

Answer:D

6. What will be subject to if submitting false materials to apply for driving license?

A. a 20~200 yuan fine

B. disqualification for applying for

C. cannot re-apply for within 1 year

D. cannot re-apply for within 2 years

Answer:C

7. The vehicle is allowed to _______ at this intersection.

A. go straight

B. turn right

C. turn left

D. go straight or turn left

Answer:B

8. Whats the meaning of this guide arrow?

A. Y-shaped intersection ahead

B. separate road ahead

C. only left or right turn ahead

D. merging with both sides ahead

Answer:C

9. Whats the meaning of this sign?

A. steep downhill road

B. continuous up slopes

C. steep uphill road

D. embankment road

Answer:C

10. This sign reminds the road in front changes to inseparate two ways section.

A. Right

B. Wrong

Answer:A

11. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer:B

12. When ignition switch is in the START position, the starter starts.

A. Right

B. Wrong

Answer:A

13. Continuously using the foot brake on a long downhill road ________.

A. Can shorten the engines service life

B. Increases the drivers labor intensity

C. Can drastically reduce the braking efficiency due to the rising temperature of the brake

D. Can easily cause vehicle overturn

Answer:C

14. The light switch is in this position, front fog lights turn on

A. Right

B. Wrong

Answer:A

15. Before entering a level crossing, the vehicle should reduce speed and change to a lower gear, and _____ after entering the level crossing.

A. Cannot change gear

B. Can change gear

C. Can change to a higher gear

D. Stop and look

Answer:A

16. A rear tire blowout can sway the tail of the vehicle. The driver should firmly hold the steering wheel with both hands to ensure the vehicle go straight, reduce speed and then stop.

A. Right

B. Wrong

Answer:A

17. What marking is the road mark in the circle?

A. crosswalk line

B. slowdown and yield line

C. stopping and yield line

D. intersection signal line

Answer:A

18. Whats the meaning of this sign?

A. rest area

B. service area

C. car park

D. observation deck

Answer:A

19. The method of this small passenger vehicle to leave the expressway lane is correct.

A. Right

B. Wrong

Answer:A

20. When driving in icy and snowy weather, light reflection from the accumulated snow can easily make a driver feel dizzy and have an illusion.

A. Right

B. Wrong

Answer:A

21. How far should be the distance from the vehicle in front at the speed of more than 100 km/hr when driving a small passenger vehicle on the expressway?

A. more than 50 meters

B. more than 60 meters

C. more than 100 meters

D. more than 80 meters

Answer:C

22. What is this manipulation device?

A. switch of windscreen wiper

B. switch of the head lights

C. switch of the turn signal

D. switch of defogger

Answer:A

23. It lights to indicate that luggage compartment is open.

A. Right

B. Wrong

Answer:B

24. Whats the meaning of this sign?

A. going straight and left turn

B. going straight and right turn

C. no going straight and no right turn

D. left turn and right turn only

Answer:B

25. It lights while driving to indicate that ______

A. engine temperature is too high

B. engine cooling system malfunction

C. engine lubrication system malfunction

D. engine temperature is too low

Answer:A