1. The subject 3 test is divided into two parts including Driving Skills, Common Knowledge on Safe and Courteous Driving.

A. Right

B. Wrong

Answer：A

2. Whats the meaning of this sign?

A. rest area

B. service area

C. car park

D. observation deck

Answer：A

3. Whats the meaning of this sign?

A. bump road

B. high outburst road

C. low-lying road

D. hump bridge

Answer：B

4. It lights while driving to indicate that ______

A. engine temperature is too high

B. engine cooling system malfunction

C. engine lubrication system malfunction

D. engine temperature is too low

Answer：A

5. What device does the switch of this symbol control?

A. the windscreen wiper and washer

B. the rear window defrosting or defogging

C. the rear window wiper and washer

D. the windscreen defrosting or defogging

Answer：C

6. What should the driver do if conditions permit when a following vehicle gives the overtaking signal on a road without a central line?

A. maintain the original speed

B. speed up

C. reduce speed, move to the right side and yield

D. immediately stop and yield

Answer：C

7. It lights when the handbrake is pulled up.

A. Right

B. Wrong

Answer：A

8. When running on an expressway that has four lanes in the same direction, the vehicles whose speed is higher than 110 kilometers per hour should run ______.

A. The far left lane

B. The second left lane

C. The far right lane

D. The third left lane

Answer：A

9. When a vehicle passes a narrow road or bridge, it is prohibited from overtaking.

A. Right

B. Wrong

Answer：A

10. When a vehicle goes uphill on a mountain road, it should change to a lower gear in a timely, accurate and rapid manner so as to avoid a situation in which driving at a high gear can reduce the power of the engine.

A. Right

B. Wrong

Answer：A

11. Whats the meaning of this sign?

A. No passing

B. driving at reduced speed

C. time limit for entering

D. no entering

Answer：A

12. When a vehicle on the main road approaches a conjunction with a feeder road, the driver should ______ in order to prevent a collision with a vehicle that suddenly enters from the feeder road.

A. Maintain the normal speed

B. Reduce speed in advance, observe and drive with care

C. Honk and swiftly pass

D. Speed up in advance and pass

Answer：B

13. Whats the meaning of this sign?

A. bus station of expressway

B. rest area of expressway

C. gasoline station of expressway

D. service area of expressway

Answer：C

14. It lights to indicate that ______

A. windscreen wash lacks

B. braking oil lacks

C. cooling system malfunction

D. coolant lacks

Answer：D

15. When encountering stopping in turn or slow-moving vehicles in front at an intersection where lanes are reduced, the motorized vehicle should _________.

A. enter the intersection from road shoulder by the right side of the vehicle in front

B. enter the intersection from the side of interspace

C. pass alternately with one vehicle each lane to enter the intersection

D. change to left lane and cut in to enter the intersection

Answer：C

16. What kind of marking is the yellow broken line in the center of the road?

A. indicative marking

B. prohibitive marking

C. warning sign

D. auxiliary marking

Answer：A

17. When a vehicle changes lane, the driver only needs to turn on the turn signal before rapidly entering the new lane.

A. Right

B. Wrong

Answer：B

18. A driver should buckled up before the vehicle moves.

A. Right

B. Wrong

Answer：A

19. Whats the meaning of this sign?

A. watch for long time honking

B. an unmanned level crossing

C. a manned level crossing

D. multi-crossing of railway and road

Answer：B

20. Overtaking is allowed when passing a level crossing in city where no train passes.

A. Right

B. Wrong

Answer：B

21. Do not start up a vehicle when the door or compartment is not properly closed.

A. Right

B. Wrong

Answer：A

22. Can leave the expressway into the ramp from this location directly.

A. Right

B. Wrong

Answer：B

23. Whats the meaning of this sign?

A. right-turn lane

B. U turn lane

C. left-turn lane

D. lanes for going in different directions

Answer：A

24. Whats the meaning of the white horizontal solid line in the circle?

A. turning waiting line

B. deceleration line

C. yielding line

D. stop line

Answer：D

25. What causes the rear-end collision?

A. not observe through the rear-view mirror while the vehicle in front brakes

B. the vehicle in front brakes suddenly

C. distance from the vehicle in front is too close when the rear vehicle overtakes

D. not maintain a safe distance from the vehicle in front

Answer：D