1. A small bus driver should reduce speed rapidly when he suddenly feel bumpy on a flat expressway, to prevent tire blowout.

A. Right

B. Wrong

Answer：A

2. What marking are the white broken lines in the circles?

A. small vehicles turning lines

B. lane connection lines

C. non-motorized vehicles guide lines

D. intersection guide line

Answer：D

3. It flashes when breaking down.

A. Right

B. Wrong

Answer：B

4. When driving in icy and snowy weather, light reflection from the accumulated snow can easily make a driver feel dizzy and have an illusion.

A. Right

B. Wrong

Answer：A

5. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer：B

6. When overtaking on a mountain road, the vehicle should overtake ______.

A. By taking every possible chance

B. By selecting a wide gentle uphill section

C. By selecting a fairly long downhill section

D. By selecting a relatively gentle downhill section

Answer：B

7. When encountering a vehicle coming in the opposite direction on a mountain road, the driver should ______ when crossing each other.

A. Not reduce speed

B. Stick to the center of the road

C. Speed up

D. Reduce speed or stop to yield

Answer：D

8. When passing a dangerous section of a mountain road, especially by the locations of frequent occurrence of landslides, mudslides, the driver should drive with care and avoid stopping.

A. Right

B. Wrong

Answer：A

9. How to use lights in this weather condition?

A. use high beam lights

B. use fog lights

C. not use any light

D. turn on the right-turn signal

Answer：B

10. The doors of both sides are not closed if it lights.

A. Right

B. Wrong

Answer：A

11. Whats the role of the indicative marking?

A. No passing

B. indicate vehicles to pass

C. restrict from passing

D. warn and remind

Answer：B

12. Whats the meaning of this sign?

A. rest area

B. service area

C. car park

D. observation deck

Answer：A

13. How to use light in this situation at the intersection?

A. turn off high beam lights

B. use hazard lights

C. use the high and low beam lights alternately

D. use high beam lights

Answer：C

14. Whats the meaning of this sign?

A. customs inspection

B. stop-for-inspection

C. frontier inspection

D. no passing

Answer：B

15. When driving at night, the drivers observation ability is visibly poorer and his visibility range becomes shorter than driving in the daytime.

A. Right

B. Wrong

Answer：A

16. When entering an expressway toll gate, the driver should select a gate where _______.

A. There are more vehicles

B. The red light is on

C. The green light is on

D. Service is temporarily suspended

Answer：C

17. Whats the meaning of the marking in the red circle?

A. temporary stopping

B. large bus stopping

C. bus station

D. emergency stopping

Answer：C

18. Which is correct when learning driving on road?

A. drive the corresponding coach car with coach sitting by to guide

B. drive the corresponding coach car alone

C. drive the corresponding coach car with other one who is not a coach sitting by to guide

D. drive the private car with coach sitting by to guide

Answer：A

19. Traffic Police can detain the vehicle which is suspected of using the falsified or altered license plate and vehicle license.

A. Right

B. Wrong

Answer：A

20. Traffic signals include Traffic lights, Traffic signs and Command of the traffic police.

A. Right

B. Wrong

Answer：A

21. The hazard lights can be used when ________

A. encountering traffic congestion

B. following a vehicle on road

C. the vehicle breaks down and stops

D. leading the vehicle behind

Answer：C

22. Whats the meaning of this sign?

A. an unmanned level crossing 150m ahead

B. an unmanned level crossing 100m ahead

C. a manned level crossing 100m ahead

D. a manned level crossing 150m ahead

Answer：A

23. It lights when turning on the front fog light.

A. Right

B. Wrong

Answer：B

24. The yellow lane-dividing line on the road is used to _____

A. allow to drive in left lane

B. separate the traffic flow in opposite directions

C. separate the traffic flow in the same direction

D. prohibit to cross the opposite lane

Answer：B

25. Whats the meaning of this sign?

A. bypass at construction section

B. two-way traffic

C. bypass from left or right side

D. watch for danger

Answer：C