1. How to do when encountering slow-moving vehicles in front?

A. follow the vehicles in front

B. occupy the opposite lane to overtake

C. borrow the lane from right side to overtake

D. overtake from both sides as will

Answer：A

2. Which is incorrect when a motorized vehicle breaks down on the expressway?

A. place warning sign as required

B. passengers cannot get off

C. call the police at once

D. turn on the hazard lights

Answer：B

3. What is this manipulation device?

A. switch of the turn signal

B. switch of the head lights

C. switch of wiper

D. switch of defogger

Answer：D

4. The motorized vehicle driver is not allowed to drive a motorized vehicle when his driving license is detained.

A. Right

B. Wrong

Answer：A

5. Choose the lane with the green arrow light on.

A. Right

B. Wrong

Answer：A

6. When a vehicle starts up, the driver should observe the traffic conditions and begin to start up after making sure it is safe to do so.

A. Right

B. Wrong

Answer：A

7. At night, the drivers observation is markedly poorer than in the daytime and the range of visibility range is _______.

A. Unchanged

B. Irregular

C. Longer

D. Shorter

Answer：D

8. Whats the meaning of this sign?

A. 3m width limit ahead

B. 3m width limit

C. the 3m width limit ban is lifted

D. 3m height limit

Answer：B

9. If a vehicle enters a left lane for overtaking but is unable to ensure a safe horizontal distance with the normally-running vehicle in front, the driver should ________.

A. Speed up and overtake

B. Overtake after running a distance in parallel

C. Give up overtaking

D. Overtake with care

Answer：C

10. In which situation cannot overtake a vehicle in front?

A. vehicle in front is reducing speed to yield

B. vehicle in front is turning left

C. vehicle in front is pulling over by the roadside

D. vehicle in front is turning right

Answer：B

11. When a motorized vehicle crosses a non-motorized vehicle on a narrow road or a narrow bridge at night, the motorized vehicle should use the high beam light.

A. Right

B. Wrong

Answer：B

12. When a vehicle has to stop on an expressway due to a vehicle trouble, the driver should place a breakdown warning sign beyond ______ m behind the vehicle.

A. 25

B. 150

C. 100

D. 50

Answer：B

13. Whats the meaning of this sign?

A. a manned level crossing

B. multi-crossing of railway and road

C. grade separation level crossing

D. an unmanned level crossing

Answer：A

14. Driving a motorized vehicle shall not overtake in tunnels, steep slopes and other special sections.

A. Right

B. Wrong

Answer：A

15. When driving at night, the driver should reduce speed and go forward if the vehicle coming in the opposite direction fails to turn off the high beam light. This is designed to prevent an accident from happening when there are pedestrians crossing the place where the lights of the two vehicles meet.

A. Right

B. Wrong

Answer：A

16. This sign indicates construction section ahead and bypassing from left or right side.

A. Right

B. Wrong

Answer：B

17. In this case, by the right side of the bus lane to overtake.

A. Right

B. Wrong

Answer：B

18. Whats the meaning of this sign?

A. U turn lane

B. bypassing lane

C. lanes for going in different directions

D. left-turn lane

Answer：A

19. Turn on the left-turn signal in advance when making a U turn on the road.

A. Right

B. Wrong

Answer：A

20. Whats the meaning of this sign?

A. flat intersection

B. flat ring intersection

C. attention to interactive intersection

D. attention to separate intersection

Answer：D

21. When the driver senses a tire blowout on the road, he should control the direction of the vehicle, gently depress the brake pedal to slowly reduce the speed and gradually park the vehicle steadily on the roadside.

A. Right

B. Wrong

Answer：A

22. When a vehicle passes a crosswalk, the driver should yield to the pedestrians.

A. Right

B. Wrong

Answer：A

23. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer：B

24. The starter works when turning the ignition switch to the ACC position.

A. Right

B. Wrong

Answer：B

25. Whats the meaning of this guide arrow?

A. left curve or need to merge with the left flow ahead

B. right curve or need to merge with the right flow ahead

C. merge with the left flow due to right side obstacle ahead

D. left curve or need to bypass from left side ahead

Answer：A