1. Which part does it control when rotating this part of the switch?

A. the low beam lights

B. the head and tail fog lights

C. high beam lights

D. turn signals

Answer：B

2. When a vehicle changes lane, the driver should turn on the turn signal and rapidly enter the new lane.

A. Right

B. Wrong

Answer：B

3. When encountering a vehicle in the opposite direction forcing its way by using his lane, the driver should __________.

A. Force the other side to drive by the right side

B. Use the high beam light to warn the other side

C. Voluntarily yield to the other side

D. Go ahead by the center of the road

Answer：C

4. Whats the meaning of this sign?

A. ring intersection ahead

B. intersection ahead

C. Y-shaped intersection ahead

D. T-shaped intersection ahead

Answer：C

5. Whats the meaning of the marking in the red circle?

A. temporary stopping

B. bay-stopping

C. emergency stopping

D. public bus station

Answer：B

6. When a motorized vehicle goes at night through an intersection that has no traffic lights, the driver should not use the high and low beam lights alternately.

A. Right

B. Wrong

Answer：B

7. How often should a driver who is more than 60 years old present the certificate of physical conditions?

A. every 3 years

B. every 2 years

C. every 6 months

D. every 1 year

Answer：D

8. This small car can not stop here.

A. Right

B. Wrong

Answer：A

9. How to use lights at night while crossing each other on narrow road or bridge?

A. turn off all the lights

B. turn on the low beam lights

C. turn off the head lights

D. turn on high beam lights

Answer：B

10. Within how long should a driver whose information has changed apply for new license?

A. 30 days

B. 40 days

C. 50 days

D. 60 days

Answer：A

11. What marking is the combination of the white broken lines and the triangle area?

A. road entry marking

B. lane-dividing line that can be crossed

C. deceleration line at road exit

D. road exit marking

Answer：D

12. What is the max speed on this city road?

A. 30km/hr

B. 40km/hr

C. 50km/hr

D. 70km/hr

Answer：C

13. When a motorized vehicle makes a U turn, turns around or goes down a slope, the maximum speed should not exceed 40 kilometers per hour.

A. Right

B. Wrong

Answer：B

14. The method and direction of changing lanes by the red car is correct.

A. Right

B. Wrong

Answer：B

15. Stop the vehicle and observe when reaching the level crossing in this situation.

A. Right

B. Wrong

Answer：A

16. When passing an unmanned level crossing, the driver should ________.

A. Speed up and pass

B. Reduce speed and pass

C. Maintain the speed and pass

D. Stop, look and pass

Answer：D

17. Whats the meaning of the white solid line in the middle of the road?

A. unilateral same direction lanes dividing line that can be crossed

B. same direction lanes dividing line that can not be crossed

C. bilateral same direction lanes dividing line that can be crossed

D. opposite direction lanes dividing line that can not be crossed

Answer：B

18. What marking is the yellow broken line in the circle?

A. non-motorized vehicles guide lines

B. intersection guide line

C. lane connection lines

D. small vehicles turning lines

Answer：B

19. One who runs away after causing a traffic accident and constitute a crime can not apply for motorized vehicle driving license.

A. Right

B. Wrong

Answer：A

20. Whats the meaning of this sign?

A. road narrows on the left side

B. narrow bridge

C. narrow road

D. road narrows on the right side

Answer：B

21. Whats the meaning of this sign?

A. overtaking ban is lifted

B. changing lane is allowed

C. changing lane ban is lifted

D. borrowing lane ban is lifted

Answer：A

22. A motorized vehicle driver who reverses, drives in the opposite direction or make a U turn by crossing the central dividing strip on the expressway is subject to a 6-point penalty.

A. Right

B. Wrong

Answer：B

23. When encountering a traffic jam on the expressway, the driver should follow the front vehicle lining up, and immediately turn on the hazard light to prevent rear-end collision.

A. Right

B. Wrong

Answer：A

24. ABS system can maximize the braking efficiency when conducting _______

A. braking intermittently

B. braking continuously

C. applying emergency braking

D. gently depressing the brake pedal

Answer：C

25. Which part does it control when pulling this switch?

A. turn signals

B. reverse light

C. contour light

D. hazard light

Answer：A